-- *****************************************************************
-- REDSTONE-ISIS-MIB
--
-- Redstone Communications Inc. Enterprise MIB
-- RX1400/RX700 Integrated IS-IS MIB
--
-- This document describes a management information base for the
-- IS-IS Routing protocol, as described in ISO 10589 [2], when it
-- is used to construct routing tables for IP networks, as
-- described in RFC 1195 [3].
--
-- Copyright 1998-1999 Redstone Communications, Incorporated.
-- All Rights Reserved.
-- *****************************************************************REDSTONE-ISIS-MIB DEFINITIONS::=BEGINIMPORTSMODULE-IDENTITY,OBJECT-TYPE,Integer32,Counter32,IpAddressFROM SNMPv2-SMI
MODULE-COMPLIANCE,OBJECT-GROUPFROM SNMPv2-CONF
TEXTUAL-CONVENTION,DisplayString,RowStatus,TruthValueFROM SNMPv2-TC
rsMgmt
FROM REDSTONE-SMI;rsIsisMIB MODULE-IDENTITYLAST-UPDATED"0002220000Z"ORGANIZATION"Redstone Communications, Inc."CONTACT-INFO"
Redstone Communications, Inc. 5 Carlisle Road
Westford MA 01886 USA
Tel: +1-978-692-1999
Email: mib@redstonecom.com
"DESCRIPTION"The ISIS MIB for Redstone Communications, Inc. enterprise"REVISION"0002220000Z"DESCRIPTION"Initial version of this MIB module."::={ rsMgmt 38}-- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Textual conventions
-- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-- Type definitionsOSINSAddress ::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"OSI Network Service Address, e.g. NSAP, Network Entity Title"SYNTAXOCTETSTRING(SIZE(0..20))SNPAAddress ::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"A MAC Address or DTE Address or other SNPA Address."SYNTAXOCTETSTRING(SIZE(0..20))NSAPPrefix ::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"NSAP Prefix. The first octet of the string is used to
encode as an unsigned integer the length in bits of the
subsequent prefix. This length must be a multiple of 4
bits and may range from 0..160. The second and
subsequent octets are used to hold the prefix value.
If the last 4 bits of the last octet are not part of
the prefix then their value is undefined."SYNTAXOCTETSTRING(SIZE(1..21))SNPAPrefix ::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"SNPA Prefix. The first octet of the string is used to
encode as an unsigned integer the length in bits of the
subsequent prefix. The second and
subsequent octets are used to hold the prefix value.
Bits in the last octet which are not part of
the prefix have undefined value."SYNTAXOCTETSTRING(SIZE(1..21))SystemID ::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"A system ID."SYNTAXOCTETSTRING(SIZE(0..8))OperState ::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"Type used in enabling and disabling a row."SYNTAXINTEGER{off(1),
on(2)}AuthTime ::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"Then number of seconds since Jan. 1 1970."SYNTAXInteger32LSPBuffSize ::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"Integer sub range for LSP size."SYNTAXInteger32(512..9180)LevelState ::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"states of the ISIS protocol."SYNTAXINTEGER{off (1),on (2),waiting (3)}SupportedProtocol ::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"Types of network protocol supported by Integrated ISIS.
The values for ISO8473 and IP are those registered for
these protocols in ISO TR9577."
SYNTAXINTEGER{iso8473(129),ip(204),ipV6(205)}RsDefaultMetric ::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"Integer sub-range for default metric for single hop. The value is
truncated to 63 when the rsIsisSysL1MetricStyle or
rsIsisSysL2MetricStyle is set to rsIsisMetricStyleNarrow "SYNTAXInteger32(1..16777214)DefaultMetric ::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"Integer sub-range for default metric for single hop."SYNTAXInteger32(1..63)OtherMetric ::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"Integer sub-range for metrics other than the default
metric for single hop."SYNTAXInteger32(0..63)MetricType ::=TEXTUAL-CONVENTION
STATUScurrentDESCRIPTION"Class of metric at Level 2."SYNTAXINTEGER{internal(1),external(2)}CircuitID ::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"ID for a circuit."SYNTAXOCTETSTRING(SIZE(2..9))ISPriority ::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"Integer sub-range for ISIS priority."SYNTAXInteger32(1..127)TOS ::=INTEGER{default(1),delay(2),expense(3),error(4)}
-- Types Of Service (equivalent to Qualities Of Service)
-- which define types of metric.PathCost ::=INTEGER(0..4 | 261 | 412 | 864)-- Integer sub-range for any metric for complete path.-- Behaviour Definitions-- ResettingTimer behaviour definition
-- "This object specifies the interval between certain events in
-- the operation of the protocol state machine. If the value of
-- this object is set to a new value while the protocol state
-- machine is in operation, the implementation shall take the
-- necessary steps to ensure that for any time interval which
-- was in progress when the value of the corresponding object
-- was changed, the next expiration of that interval takes place
-- the specified time after the original start of that interval,
-- or immediately, whichever is later. The precision with which
-- this time shall be implemented shall be the same as that
-- associated with the basic operation of the timer object."-- OperationalState behaviour definition
-- "This object controls the enabling and disabling of the
-- corresponding table row. Setting this object to the value
-- off has the effect of disabling the corresponding row.
-- Setting this object to the value on has the effect of
-- enabling the corresponding row. Setting the value of this
-- object to the same value as its current value has no effect.
-- If the table entry also contains an object controlling the
-- row status then the object following the operationalState
-- behaviour shall not be set to on when the object following
-- the Row Status behaviour has value off. An attempt to do
-- so is rejected."-- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Managed objects
-- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++rsIsisObjects OBJECTIDENTIFIER::={ rsIsisMIB 1}
rsIsisTrapGroup OBJECTIDENTIFIER::={ rsIsisMIB 2}rsIsisConformance OBJECTIDENTIFIER::={ rsIsisMIB 3}rsIsisSystemGroup OBJECTIDENTIFIER::={ rsIsisObjects 1}rsIsisCircuitGroup OBJECTIDENTIFIER::={ rsIsisObjects 2}rsIsisSysTable OBJECT-TYPESYNTAXSEQUENCEOF IsisSysEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The set of instances of the Integrated IS-IS protocol
existing on the system."::={ rsIsisSystemGroup 1}rsIsisSysEntry OBJECT-TYPESYNTAX IsisSysEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Each row defines information specific to a single
instance of the protocol existing on the system."REFERENCE"ISIS.poi cLNSISISBasic-P (1)"INDEX{ rsIsisSysInstance }
::={ rsIsisSysTable 1}
IsisSysEntry ::=SEQUENCE{
rsIsisSysInstance
Integer32,
rsIsisSysVersion
DisplayString,
rsIsisSysType
INTEGER,
rsIsisSysID
SystemID,
rsIsisSysMaxPathSplits
Integer32,
rsIsisSysMaxLSPGenInt
Integer32,
rsIsisSysOrigL1LSPBuffSize
LSPBuffSize,
rsIsisSysMaxAreaAddresses
Integer32,
rsIsisSysMinL1LSPGenInt
Integer32,
rsIsisSysMinL2LSPGenInt
Integer32,
rsIsisSysPollESHelloRate
Integer32,
rsIsisSysWaitTime
Integer32,
rsIsisSysOperState
OperState,
rsIsisSysL1State
LevelState,
rsIsisSysCorrLSPs
Counter32,
rsIsisSysLSPL1DbaseOloads
Counter32,
rsIsisSysManAddrDropFromAreas
Counter32,
rsIsisSysAttmptToExMaxSeqNums
Counter32,
rsIsisSysSeqNumSkips
Counter32,
rsIsisSysOwnLSPPurges
Counter32,
rsIsisSysIDFieldLenMismatches
Counter32,
rsIsisSysMaxAreaAddrMismatches
Counter32,
rsIsisSysOrigL2LSPBuffSize
LSPBuffSize,
rsIsisSysL2State
LevelState,
rsIsisSysLSPL2DbaseOloads
Counter32,
rsIsisSysAuthFails
Counter32,
rsIsisSysLSPIgnoreErrors
TruthValue,
rsIsisSysMaxAreaCheck
TruthValue,
rsIsisSysSetOverloadBit
TruthValue,
rsIsisSysSetOverloadBitStartupDuration
Integer32,
rsIsisSysMaxLspLifetime
Integer32,
rsIsisSysL1SpfInterval
Integer32,
rsIsisSysL2SpfInterval
Integer32,
rsIsisSysIshHoldTime
Integer32,
rsIsisSysIshConfigTimer
Integer32,
rsIsisSysDistributeDomainWide
TruthValue,
rsIsisSysDistance
Integer32,
rsIsisSysL1MetricStyle
INTEGER,
rsIsisSysL2MetricStyle
INTEGER,
rsIsisSysIsoRouteTag
OCTETSTRING}rsIsisSysInstance OBJECT-TYPESYNTAXInteger32MAX-ACCESSnot-accessibleSTATUScurrent
DESCRIPTION"The unique identifier of the Integrated IS-IS instance
to which this row corresponds. This object follows the
index behaviour."::={ rsIsisSysEntry 1}rsIsisSysVersion OBJECT-TYPESYNTAXDisplayString(SIZE(0..24))MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The version number of the IS-IS protocol to which this
instance conforms. This value must be set by the
implementation when the row is valid."REFERENCE"ISIS.aoi version (1)"::={ rsIsisSysEntry 2}rsIsisSysType OBJECT-TYPESYNTAXINTEGER{level1IS (1),level1l2IS (2),level2Only(3)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The type of this instance of the Integrated IS-IS
protocol. This object follows the
replaceOnlyWhileDisabled behaviour."REFERENCE"ISIS.aoi iSType (2)"::={ rsIsisSysEntry 3}
rsIsisSysID OBJECT-TYPESYNTAX SystemID
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The ID for this instance of the Integrated IS-IS
protocol. This value is appended to each of the
instance's area addresses to form the Network Entity
Titles valid for this instance. The derivation of a value
for this object is implementation-specific. Some
implementations may assign values and not permit write
MAX-ACCESS, others may require the value to be set manually."REFERENCE"ISIS.aoi systemId (119)"::={ rsIsisSysEntry 4}rsIsisSysMaxPathSplits OBJECT-TYPESYNTAXInteger32(1..32)MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Maximum number of paths with equal routing metric value
which it is permitted to split between. This object
follows the replaceOnlyWhileDisabled behaviour."REFERENCE"ISIS.aoi maximumPathSplits (3)"DEFVAL{4}
::={ rsIsisSysEntry 5}rsIsisSysMaxLSPGenInt OBJECT-TYPESYNTAXInteger32(1..65535)
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Maximum interval, in seconds, between generated LSPs
by this instance. This object follows the resettingTimer
behaviour."REFERENCE"ISIS.aoi maximumLSPGenerationInterval (6)"DEFVAL{900}
::={ rsIsisSysEntry 6}rsIsisSysOrigL1LSPBuffSize OBJECT-TYPESYNTAX LSPBuffSize
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The maximum size of Level 1 LSPs and SNPs originated by
this instance. This object follows the
replaceOnlyWhileDisabled behaviour."REFERENCE"ISIS.aoi originatingL1LSPBufferSize (9)"DEFVAL{1497}
::={ rsIsisSysEntry 7}rsIsisSysMaxAreaAddresses OBJECT-TYPESYNTAXInteger32(0..254)MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The maximum number of area addresses to be permitted for
the area in which this instance exists. Note that all
Intermediate Systems in the same area must have the same
value configured for this attribute if correct operation
is to be assumed. This object follows the
replaceOnlyWhileDisabled behaviour."REFERENCE"ISIS.aoi maximumAreaAddresses (4)"DEFVAL{3}
::={ rsIsisSysEntry 8}rsIsisSysMinL1LSPGenInt OBJECT-TYPESYNTAXInteger32(0..120)MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Minimum interval, in seconds, between successive generation
of L1 LSPs with the same LSPID by this instance.
This object follows the resettingTimer behaviour."REFERENCE"ISIS.aoi minimumLSPGenerationInterval (11)"DEFVAL{5}
::={ rsIsisSysEntry 9}rsIsisSysMinL2LSPGenInt OBJECT-TYPESYNTAXInteger32(0..120)MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Minimum interval, in seconds, between successive generation
of L2 LSPs with the same LSPID by this instance.
This object follows the resettingTimer behaviour."REFERENCE"ISIS.aoi minimumLSPGenerationInterval (11)"DEFVAL{5}
::={ rsIsisSysEntry 10}rsIsisSysPollESHelloRate OBJECT-TYPESYNTAXInteger32(1..65535)MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The value, in seconds, to be used for the suggested ES
configuration timer in ISH PDUs when soliciting the ES
configuration."REFERENCE"ISIS.aoi pollESHelloRate (13)"DEFVAL{10}
::={ rsIsisSysEntry 11}rsIsisSysWaitTime OBJECT-TYPESYNTAXInteger32(1..65535)MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Number of seconds to delay in waiting state before
entering on state. This object follows the resettingTimer
behaviour."REFERENCE"ISIS.aoi waitingTime (15)"DEFVAL{60}
::={ rsIsisSysEntry 12}rsIsisSysOperState OBJECT-TYPESYNTAX OperState
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION
"The operational state of this instance of the Integrated
IS-IS protocol. Setting this object to the value on when
its current value is off enables operation of this
instance of the Integrated IS-IS protocol."DEFVAL{ off }
::={ rsIsisSysEntry 13}rsIsisSysL1State OBJECT-TYPESYNTAX LevelState
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The state of the Level 1 database."REFERENCE"ISIS.aoi l1State (17)"::={ rsIsisSysEntry 14}rsIsisSysCorrLSPs OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Number of corrupted LSPs detected."REFERENCE"ISIS.aoi corruptedLSPsDetected (19)"::={ rsIsisSysEntry 15}rsIsisSysLSPL1DbaseOloads OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Number of times the LSP L1 database has become
overloaded."REFERENCE"ISIS.aoi lSPL1DatabaseOverloads (20)"::={ rsIsisSysEntry 16}
rsIsisSysManAddrDropFromAreas OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Number of times a manual address has been dropped from
the area."REFERENCE"ISIS.aoi manualAddressesDroppedFromArea (21)"::={ rsIsisSysEntry 17}rsIsisSysAttmptToExMaxSeqNums OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Number of times the IS has attempted to exceed the
maximum sequence number."REFERENCE"ISIS.aoi
attemptsToExceedmaximumSequenceNumber (22)"::={ rsIsisSysEntry 18}rsIsisSysSeqNumSkips OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Number of times a sequence number skip has occurred."REFERENCE"ISIS.aoi sequenceNumberSkips (23)"::={ rsIsisSysEntry 19}rsIsisSysOwnLSPPurges OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-only
STATUScurrentDESCRIPTION"Number of times a zero-aged copy of the system's own LSP
is received from some other node."REFERENCE"ISIS.aoi ownLSPPurges (24)"::={ rsIsisSysEntry 20}rsIsisSysIDFieldLenMismatches OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Number of times a PDU is received with a different value
for ID field length to that of the receiving system."REFERENCE"ISIS.aoi iDFieldLengthMismatches (25)"::={ rsIsisSysEntry 21}rsIsisSysMaxAreaAddrMismatches OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Number of times a PDU is received with a different value
for MaximumAreaAddresses from that of the receiving
system."REFERENCE"ISIS.aoi MaximumAreaAddressesMismatches (118)"::={ rsIsisSysEntry 22}-- The following objects map those from the cLNSISISLevel2-P
-- PackagersIsisSysOrigL2LSPBuffSize OBJECT-TYPESYNTAX LSPBuffSize
MAX-ACCESSread-writeSTATUScurrent
DESCRIPTION"The maximum size of Level 2 LSPs and SNPs originated by
this system. This object follows the
replaceOnlyWhileDisabled behaviour."REFERENCE"ISIS.aoi originatingL2LSPBufferSize (26)"DEFVAL{1497}
::={ rsIsisSysEntry 23}rsIsisSysL2State OBJECT-TYPESYNTAX LevelState
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The state of the Level 2 database."REFERENCE"ISIS.aoi l2State (28)"::={ rsIsisSysEntry 24}rsIsisSysLSPL2DbaseOloads OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Number of times the Level 2 LSP database has become
overloaded."REFERENCE"ISIS.aoi lSPL2DatabaseOverloads (32)"::={ rsIsisSysEntry 25}rsIsisSysAuthFails OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of authentication failures recognized by this
instance of the protocol."
::={ rsIsisSysEntry 26}rsIsisSysLSPIgnoreErrors OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"If true, allow the router to ignore IS-IS link state
packets (LSPs) that are received with internal checksum
errors rather than purging the LSPs."DEFVAL{ false }
::={ rsIsisSysEntry 27}rsIsisSysMaxAreaCheck OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"When on, enables checking of maximum area
addresses per IS version of ISO10589."DEFVAL{ true }
::={ rsIsisSysEntry 28}rsIsisSysSetOverloadBit OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Isis overload bit"DEFVAL{ false }
::={ rsIsisSysEntry 29}rsIsisSysSetOverloadBitStartupDuration OBJECT-TYPESYNTAXInteger32(0..86400)
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Specifies the length in time of seconds to set the overload
bit from startup."DEFVAL{0}
::={ rsIsisSysEntry 30}rsIsisSysMaxLspLifetime OBJECT-TYPESYNTAXInteger32(1..65535)MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Specifies the maximum time(in seconds) a LSP will remain
in the box without being refreshed before being considered
invalid."DEFVAL{1200}
::={ rsIsisSysEntry 31}rsIsisSysL1SpfInterval OBJECT-TYPESYNTAXInteger32(0..120)MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Minimum interval, in seconds, between level 1 SPF calculations."DEFVAL{5}
::={ rsIsisSysEntry 32}
rsIsisSysL2SpfInterval OBJECT-TYPESYNTAXInteger32(0..120)MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Minimum interval, in seconds, between level 2 SPF calculations."DEFVAL{5}
::={ rsIsisSysEntry 33}rsIsisSysIshHoldTime OBJECT-TYPESYNTAXInteger32(1..65535)MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Specify a holdtime advertised in ESH/ISH PDUs."DEFVAL{30}
::={ rsIsisSysEntry 34}rsIsisSysIshConfigTimer OBJECT-TYPESYNTAXInteger32(1..65535)MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Specify the rate of transmission for ESH and ISH packets."DEFVAL{10}
::={ rsIsisSysEntry 35}
rsIsisSysDistributeDomainWide OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"When on, enables distribution of prefixes throughout a
multi-level domain."DEFVAL{ false }::={ rsIsisSysEntry 36}rsIsisSysDistance OBJECT-TYPESYNTAXInteger32(1..255)MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The weight applied to IS-IS routes."DEFVAL{115}::={ rsIsisSysEntry 37}rsIsisSysL1MetricStyle OBJECT-TYPESYNTAXINTEGER{rsIsisMetricStyleNarrow (2),rsIsisMetricStyleNarrowTransition(3),rsIsisMetricStyleTransition(4),rsIsisMetricStyleWide(5),rsIsisMetricStyleWideTransition(6)
}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Specifies the type of IP reachability TLV to advertise in
level 1 LSPs."DEFVAL{ rsIsisMetricStyleNarrow }
::={ rsIsisSysEntry 38}rsIsisSysL2MetricStyle OBJECT-TYPESYNTAXINTEGER{rsIsisMetricStyleNarrow (2),rsIsisMetricStyleNarrowTransition(3),rsIsisMetricStyleTransition(4),rsIsisMetricStyleWide(5),rsIsisMetricStyleWideTransition(6)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Specifies the type of IP reachability TLV to advertise in
level 2 LSPs."DEFVAL{ rsIsisMetricStyleNarrow }::={ rsIsisSysEntry 39}rsIsisSysIsoRouteTag OBJECT-TYPESYNTAXOCTETSTRING(SIZE(1..32))
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The ISO routing area tag"::={ rsIsisSysEntry 40}-- The Level 1 Manual Area Address Table
-- contains the set of area addresses manually configured
-- for each instance of the Integrated IS-IS protocol.
-- At least one row in which the value of
-- rsIsisManAreaAddRowStatus
-- is on must be present for each instance of the protocol
-- when rsIsisSysOperState is also on for that instance. The
-- maximum number of rows in this table for each instance of
-- the protocol for which the object rsIsisManAreaAddrRowStatus
-- has the value on is the value of maximumAreaAddresses (as
-- defined in ISO 10589) for that instance. An Attempt
-- to create a new row such that the number of rows with
-- rsIsisManAreaAddrRowStatus set to on for that protocol
-- instance exceeds maximumAreaAddresses is rejected."rsIsisManAreaAddrTable OBJECT-TYPESYNTAXSEQUENCEOF IsisManAreaAddrEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The set of manual area addresses configured on this
Intermediate System."REFERENCE"ISIS.aoi manualAreaAddresses (10)"::={ rsIsisSystemGroup 2}rsIsisManAreaAddrEntry OBJECT-TYPESYNTAX IsisManAreaAddrEntry
MAX-ACCESSnot-accessible
STATUScurrentDESCRIPTION"Each entry contains one area address manually configured
on this system"INDEX{ rsIsisManAreaAddrSysInstance,
rsIsisManAreaAddr }
::={ rsIsisManAreaAddrTable 1}
IsisManAreaAddrEntry ::=SEQUENCE{
rsIsisManAreaAddrSysInstance
Integer32,
rsIsisManAreaAddr
OSINSAddress,
rsIsisManAreaAddrRowStatus
RowStatus}rsIsisManAreaAddrSysInstance OBJECT-TYPESYNTAXInteger32MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The unique identifier of the Integrated IS-IS instance
to which this row corresponds. This object follows the
index behaviour."::={ rsIsisManAreaAddrEntry 1}rsIsisManAreaAddr OBJECT-TYPESYNTAX OSINSAddress
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"A manually configured area address for this system. This
object follows the index behaviour.
Note: an index for the entry {1, {49.0001} active} in
this table would be the ordered pair
(1, (0x03 0x49 0x00 0x01)), as the length of an Octet
string is part of the OID."
::={ rsIsisManAreaAddrEntry 2}rsIsisManAreaAddrRowStatus OBJECT-TYPESYNTAXRowStatusMAX-ACCESSread-createSTATUScurrentDESCRIPTION"The state of the rsIsisManAreaAddrEntry. This object
follows the Row Status behaviour. If an attempt is
made to set this object to the value off when the
corresponding rsIsisManAreaAddrEntry is the only valid
entry for this instance and when the corresponding ISIS
instance has rsIsisSysOperState set to On then the attempt
is rejected."DEFVAL{ active }
::={ rsIsisManAreaAddrEntry 3}-- The System Integrated Group-- The System Integrated Group is present if the system
-- supports Integrated ISIS at Level 1.-- The System Protocol Supported Table-- The System Protocol Supported Table contains the manually
-- configured set of protocols supported by each
-- instance of the Integrated ISIS protocol.
--rsIsisSysProtSuppTable OBJECT-TYPESYNTAXSEQUENCEOF IsisSysProtSuppEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table contains the manually configured set of
protocols supported by each instance of the Integrated
ISIS protocol."::={ rsIsisSystemGroup 3}rsIsisSysProtSuppEntry OBJECT-TYPE
SYNTAX IsisSysProtSuppEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Each entry contains one protocol supported by an
instance of the Integrated ISIS protocol."INDEX{ rsIsisSysProtSuppSysInstance,
rsIsisSysProtSuppProtocol }::={ rsIsisSysProtSuppTable 1}
IsisSysProtSuppEntry ::=SEQUENCE{
rsIsisSysProtSuppSysInstance
Integer32,
rsIsisSysProtSuppProtocol
SupportedProtocol,
rsIsisSysProtSuppRowStatus
RowStatus}rsIsisSysProtSuppSysInstance OBJECT-TYPESYNTAXInteger32MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The unique identifier of the Integrated IS-IS instance
to which this row corresponds. This object follows the
index behaviour."::={ rsIsisSysProtSuppEntry 1}rsIsisSysProtSuppProtocol OBJECT-TYPESYNTAX SupportedProtocol
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"One supported protocol. This object follows the index
behaviour."::={ rsIsisSysProtSuppEntry 2}
rsIsisSysProtSuppRowStatus OBJECT-TYPESYNTAXRowStatusMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The state of the rsIsisSysProtSuppEntry. This object
follows the RowStatus behavior."DEFVAL{ active }
::={ rsIsisSysProtSuppEntry 3}-- The Summary Address Table-- The Summary Address Table contains the set of summary
-- addresses manually configured for each instance of
-- IP Integrated ISIS on the system.rsIsisSummAddrTable OBJECT-TYPESYNTAXSEQUENCEOF IsisSummAddrEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The set of IP summary addresses to use in forming the
contents of Level 2 LSPs originated by this level 2
Intermediate System."::={ rsIsisSystemGroup 4}rsIsisSummAddrEntry OBJECT-TYPESYNTAX IsisSummAddrEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Each entry contains one IP summary address."INDEX{ rsIsisSummAddrSysInstance,
rsIsisSummAddress,
rsIsisSummAddrMask }
::={ rsIsisSummAddrTable 1}
IsisSummAddrEntry ::=SEQUENCE{
rsIsisSummAddrSysInstance
Integer32,
rsIsisSummAddress
IpAddress,
rsIsisSummAddrMask
IpAddress,
rsIsisSummAddrRowStatus
RowStatus,
rsIsisSummAddrOperState
OperState,
rsIsisSummAddrDefaultMetric
Integer32,
rsIsisSummAddrDelayMetric
OtherMetric,
rsIsisSummAddrExpenseMetric
OtherMetric,
rsIsisSummAddrErrorMetric
OtherMetric,
rsIsisSummLevel
INTEGER}rsIsisSummAddrSysInstance OBJECT-TYPESYNTAXInteger32MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The unique identifier of the Integrated IS-IS instance
to which this row corresponds. This object follows the
index behaviours."::={ rsIsisSummAddrEntry 1}rsIsisSummAddress OBJECT-TYPESYNTAXIpAddressMAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The IP Address value for this summary address. This
object follows the index behaviour."
::={ rsIsisSummAddrEntry 2}rsIsisSummAddrMask OBJECT-TYPESYNTAXIpAddressMAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The mask value for this summary address. This object
follows the index behaviour."::={ rsIsisSummAddrEntry 3}rsIsisSummAddrRowStatus OBJECT-TYPESYNTAXRowStatusMAX-ACCESSread-createSTATUScurrentDESCRIPTION"The existence state of this summary address. This object
follows the row status behaviour."::={ rsIsisSummAddrEntry 4}rsIsisSummAddrOperState OBJECT-TYPESYNTAX OperState
MAX-ACCESSread-createSTATUScurrentDESCRIPTION"The operational state of this entry. This object follows
the operationalState behaviour. When the operational
state changes if this would cause the contents of
LSPs originated by the system to change then those new
LSPs must be generated and sent as soon as is permitted
by the ISIS protocol."::={ rsIsisSummAddrEntry 5}rsIsisSummAddrDefaultMetric OBJECT-TYPESYNTAXInteger32(0..16777214)
MAX-ACCESSread-createSTATUScurrentDESCRIPTION"The default metric value to announce this summary
address with in Level 1 or 2 LSPs generated by this system.
A Metric value of 0 indicates to use the lowest metric
value amongst the routes being summarized. When advertising
a metric value into a narrow domain( rsIsisSysL1MetricStyle or
rsIsisSysL2MetricStyle is set to rsIsisMetricStyleNarrow ) the
value will be truncated to 63."::={ rsIsisSummAddrEntry 6}rsIsisSummAddrDelayMetric OBJECT-TYPESYNTAX OtherMetric
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The delay metric value to announce this summary address
with in Level 2 LSPs generated by this system. The value
of zero is reserved to indicate that this metric is not
supported."::={ rsIsisSummAddrEntry 7}rsIsisSummAddrExpenseMetric OBJECT-TYPESYNTAX OtherMetric
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The expense metric value to announce this summary
address with in Level 2 LSPs generated by this system.
The value of zero is reserved to indicate that this
metric is not supported."::={ rsIsisSummAddrEntry 8}
rsIsisSummAddrErrorMetric OBJECT-TYPESYNTAX OtherMetric
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The error metric value to announce this summary address
with in Level n LSPs generated by this system. The value
of zero is reserved to indicate that this metric is not
supported."::={ rsIsisSummAddrEntry 9}rsIsisSummLevel OBJECT-TYPESYNTAXINTEGER{level1IS (1),level2IS (2),level1l2IS (3)}MAX-ACCESSread-createSTATUScurrentDESCRIPTION"The level of database at which to annouce this summary."::={ rsIsisSummAddrEntry 10}-- The Circuit Group-- The Circuit Group is current-- The Circuit Table
-- Each broadcast or point-to-point interface on the system
-- corresponds to one entry in the Circuit table.rsIsisCircTable OBJECT-TYPESYNTAXSEQUENCEOF IsisCircEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The table of circuits used by each instance of
Integrated IS-IS on this system."::={ rsIsisCircuitGroup 1}rsIsisCircEntry OBJECT-TYPESYNTAX IsisCircEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An rsIsisCircEntry exists for each circuit used by
Integrated IS-IS on this system."INDEX{ rsIsisCircSysInstance,
rsIsisCircIfIndex }
::={ rsIsisCircTable 1}
IsisCircEntry ::=SEQUENCE{
rsIsisCircSysInstance
Integer32,
rsIsisCircIfIndex
Integer32,
rsIsisCircLocalID
Integer32,
rsIsisCircOperState
OperState,
rsIsisCircRowStatus
RowStatus,
rsIsisCircType
INTEGER,
rsIsisCircL1DefaultMetric
RsDefaultMetric,
rsIsisCircL1DelayMetric
OtherMetric,
rsIsisCircL1ExpenseMetric
OtherMetric,
rsIsisCircL1ErrorMetric
OtherMetric,
rsIsisCircExtDomain
TruthValue,
rsIsisCircAdjChanges
Counter32,
rsIsisCircInitFails
Counter32,
rsIsisCircRejAdjs
Counter32,
rsIsisCircOutCtrlPDUs
Counter32,
rsIsisCircInCtrlPDUs
Counter32,
rsIsisCircIDFieldLenMismatches
Counter32,
rsIsisCircL2DefaultMetric
RsDefaultMetric,
rsIsisCircL2DelayMetric
OtherMetric,
rsIsisCircL2ExpenseMetric
OtherMetric,
rsIsisCircL2ErrorMetric
OtherMetric,
rsIsisCircManL2Only
TruthValue,
rsIsisCircL1ISPriority
ISPriority,
rsIsisCircL1CircID
CircuitID,
rsIsisCircL1DesIS
SystemID,
rsIsisCircLANL1DesISChanges
Counter32,
rsIsisCircL2ISPriority
ISPriority,
rsIsisCircL2CircID
CircuitID,
rsIsisCircL2DesIS
SystemID,
rsIsisCircLANL2DesISChanges
Counter32,
rsIsisCircMCAddr
INTEGER,
rsIsisCircPtToPtCircID
CircuitID,
rsIsisCircL1HelloTimer
Integer32,
rsIsisCircL2HelloTimer
Integer32,
rsIsisCircL1HelloMultiplier
Integer32,
rsIsisCircL2HelloMultiplier
Integer32,
rsIsisCircMinLSPTransInt
Integer32,
rsIsisCircMinLSPReTransInt
Integer32,
rsIsisCircL1CSNPInterval
Integer32,
rsIsisCircL2CSNPInterval
Integer32,
rsIsisCircLSPThrottle
Integer32,
rsIsisCircMeshGroupEnabled
INTEGER,
rsIsisCircMeshGroup
Integer32,
rsIsisCircLevel
INTEGER}rsIsisCircSysInstance OBJECT-TYPESYNTAXInteger32MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The unique identifier of the Integrated IS-IS instance
to which this row corresponds. This object follows the
index behaviour."::={ rsIsisCircEntry 1}rsIsisCircIfIndex OBJECT-TYPESYNTAXInteger32MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The value of ifIndex for the interface to which this
circuit corresponds."::={ rsIsisCircEntry 2}rsIsisCircLocalID OBJECT-TYPESYNTAXInteger32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION
"An identification that can be used in protocol packets
to identify a circuit. Implementations may devise ways
to assure that this value is suitable for the circuit
it is used on. LAN packets only have space for 8 bits.
Values of rsIsisCircLocalID do not need to be unique. They
are only required to differ on LANs where the Intermediate
System is the Designated Intermediate System."::={ rsIsisCircEntry 3}rsIsisCircOperState OBJECT-TYPESYNTAX OperState
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The operational state of the circuit. This object
follows the operationalState behaviour."DEFVAL{ off }
::={ rsIsisCircEntry 4}rsIsisCircRowStatus OBJECT-TYPESYNTAXRowStatusMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The existence state of this circuit. This object follows
the Row Status behaviour."DEFVAL{ active }
::={ rsIsisCircEntry 5}rsIsisCircType OBJECT-TYPESYNTAXINTEGER{broadcast(1),ptToPt(2)
}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The type of the circuit. This object follows the
replaceOnlyWhileDisabled behaviour. The type specified
must be compatible with the type of the interface defined
by the value of rsIsisCircIfIndex."REFERENCE"ISIS.aoi type (33)"::={ rsIsisCircEntry 6}rsIsisCircL1DefaultMetric OBJECT-TYPESYNTAX RsDefaultMetric
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The default metric value of this circuit for Level 1
traffic."REFERENCE"ISIS.aoi l1DefaultMetric (35)"DEFVAL{10}
::={ rsIsisCircEntry 7}rsIsisCircL1DelayMetric OBJECT-TYPESYNTAX OtherMetric
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The delay metric value of this circuit for Level 1
traffic. The value of zero is reserved to indicate that
this metric is not supported."REFERENCE"ISIS.aoi l1DelayMetric (36)"DEFVAL{0}
::={ rsIsisCircEntry 8}rsIsisCircL1ExpenseMetric OBJECT-TYPE
SYNTAX OtherMetric
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The expense metric value of this circuit for Level 1
traffic. The value of zero is reserved to indicate that
this metric is not supported."REFERENCE"ISIS.aoi l1ExpenseMetric (37)"DEFVAL{0}
::={ rsIsisCircEntry 9}rsIsisCircL1ErrorMetric OBJECT-TYPESYNTAX OtherMetric
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The error metric value of this circuit for Level 1
traffic. The value of zero is reserved to indicate that
this metric is not supported."REFERENCE"ISIS.aoi l1ErrorMetric (38)"DEFVAL{0}
::={ rsIsisCircEntry 10}rsIsisCircExtDomain OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"If true, suppress normal transmission of and
interpretation of Intra-domain ISIS PDUs on this
circuit."REFERENCE"ISIS.aoi externalDomain (46)"DEFVAL{ false }
::={ rsIsisCircEntry 11}
rsIsisCircAdjChanges OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of times an adjacency state change has
occurred on this circuit."REFERENCE"ISIS.aoi changesInAdjacencyState (40)"::={ rsIsisCircEntry 12}rsIsisCircInitFails OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of times initialization of this circuit has
failed."REFERENCE"ISIS.aoi initializationFailures (41)"::={ rsIsisCircEntry 13}rsIsisCircRejAdjs OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of times an adjacency has been rejected on
this circuit."REFERENCE"ISIS.aoi rejectedAdjacencies (42)"::={ rsIsisCircEntry 14}rsIsisCircOutCtrlPDUs OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-only
STATUScurrentDESCRIPTION"The number of IS-IS control PDUs sent on this circuit."REFERENCE"ISIS.aoi iSISControlPDUsSent (43)"::={ rsIsisCircEntry 15}rsIsisCircInCtrlPDUs OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of IS-IS control PDUs received on this
circuit."REFERENCE"ISIS.aoi controlPDUsReceived (44)"::={ rsIsisCircEntry 16}rsIsisCircIDFieldLenMismatches OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of times an IS-IS control PDU with an ID
field length different to that for this system has been
received."REFERENCE"ISIS.aoi iDFieldLengthMismatches (25)"::={ rsIsisCircEntry 17}-- The following objects map those from the linkageISISLevel2-P
-- packagersIsisCircL2DefaultMetric OBJECT-TYPESYNTAX RsDefaultMetric
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION
"The default metric value of this circuit for level 2
traffic."REFERENCE"ISIS.aoi l2DefaultMetric (68)"DEFVAL{10}
::={ rsIsisCircEntry 18}rsIsisCircL2DelayMetric OBJECT-TYPESYNTAX OtherMetric
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The delay metric value of this circuit for level 2
traffic. The value of zero is reserved to indicate that
this metric is not supported."REFERENCE"ISIS.aoi l2DelayMetric (69)"DEFVAL{0}
::={ rsIsisCircEntry 19}rsIsisCircL2ExpenseMetric OBJECT-TYPESYNTAX OtherMetric
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The expense metric value of this circuit for level 2
traffic. The value of zero is reserved to indicate that
this metric is not supported."REFERENCE"ISIS.aoi l2ExpenseMetric (70)"DEFVAL{0}
::={ rsIsisCircEntry 20}rsIsisCircL2ErrorMetric OBJECT-TYPESYNTAX OtherMetric
MAX-ACCESSread-onlySTATUScurrent
DESCRIPTION"The error metric value of this circuit for level 2
traffic. The value of zero is reserved to indicate that
this metric is not supported."REFERENCE"ISIS.aoi l2ErrorMetric (71)"DEFVAL{0}
::={ rsIsisCircEntry 21}rsIsisCircManL2Only OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"When true, indicates that this circuit is to be used
only for level 2. This object follows the
replaceOnlyWhileDisabled behaviour."REFERENCE"ISIS.aoi manualL2OnlyMode (72)"DEFVAL{ false }
::={ rsIsisCircEntry 22}-- The following objects map those from the
-- linkageISISBroadcast-P packagersIsisCircL1ISPriority OBJECT-TYPESYNTAX ISPriority
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The priority for becoming LAN Level 1 Deignated
Intermediate System on a broadcast circuit."REFERENCE"ISIS.aoi l1IntermediateSystemPriority (47)"DEFVAL{64}
::={ rsIsisCircEntry 23}rsIsisCircL1CircID OBJECT-TYPESYNTAX CircuitID
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The LAN ID allocated by the LAN Level 1 Designated
Intermediate System. Where this system is not aware of
the value (because it is not participating in the Level 1
Designated Intermediate System election), this object has
the value which would be proposed for this circuit (i.e.
the concatenation of the local system ID and the one
octet local Circuit ID for this circuit."REFERENCE"ISIS.aoi l1CircuitID (48)"::={ rsIsisCircEntry 24}rsIsisCircL1DesIS OBJECT-TYPESYNTAX SystemID
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The ID of the LAN Level 1 Designated Intermediate System
on this circuit. If, for any reason this system is not
partaking in the relevant Designated Intermediate System
election process, then the value returned is the zero
length OCTET STRING."REFERENCE"ISIS.aoi l1DesignatedIntermediateSystem (49)"::={ rsIsisCircEntry 25}rsIsisCircLANL1DesISChanges OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of times the LAN Level 1 Designated
Intermediate System has changed."
REFERENCE"ISIS.aoi
lanL1DesignatedIntermediateSystemChanges (50)"::={ rsIsisCircEntry 26}-- The following objects map those from the
-- linkageISISLevel2Broadcast-P packagersIsisCircL2ISPriority OBJECT-TYPESYNTAX ISPriority
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The priority for becoming LAN level 2 Designated
Intermediate System."REFERENCE"ISIS.aoi l2IntermediateSystemPriority (73)"DEFVAL{64}
::={ rsIsisCircEntry 27}rsIsisCircL2CircID OBJECT-TYPESYNTAX CircuitID
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The LAN ID allocated by the LAN Level 2 Designated
Intermediate System. Where this system is not aware of
this value (because it is not participating in the Level
2 Designated Intermediate System election), this object
has the value which would be proposed for this circuit
(i.e. the concatenation of the local system ID and the
one octet local Circuit ID for this circuit."REFERENCE"ISIS.aoi l2CircuitID (74)"::={ rsIsisCircEntry 28}rsIsisCircL2DesIS OBJECT-TYPESYNTAX SystemID
MAX-ACCESSread-only
STATUScurrentDESCRIPTION"The ID of the LAN Level 2 Designated Intermediate System
on this circuit. If, for any reason, this system is not
partaking in the relevant Designated Intermediate System
election process, then the value returned is the zero
length OCTET STRING."REFERENCE"ISIS.aoi l2DesignatedIntermediateSystem (75)"::={ rsIsisCircEntry 29}rsIsisCircLANL2DesISChanges OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of times the LAN Level 2 Designated
Intermediate System has changed."REFERENCE"ISIS.aoi
lanL2DesignatedIntermediateSystemChanges (76)"::={ rsIsisCircEntry 30}rsIsisCircMCAddr OBJECT-TYPESYNTAXINTEGER{group (1),functional (2)}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Specifies which type of multicast address will
be used for sending HELLO PDUs on this
circuit."DEFVAL{ group }
::={ rsIsisCircEntry 31}
rsIsisCircPtToPtCircID OBJECT-TYPESYNTAX CircuitID
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The ID of the circuit allocated during initialization.
If no value has been negotiated (either because the
adjacency is to an End System, or because initialization
has not yet successfully completed), this object has the
value which would be proposed for this circuit (i.e. the
concatenation of the local system ID and the one octet
local Circuit ID for this circuit."REFERENCE"ISIS.aoi ptPtCircuitID (51)"::={ rsIsisCircEntry 32}rsIsisCircL1HelloTimer OBJECT-TYPESYNTAXInteger32(0..65535)MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Maximum period, in seconds, between Level 1
IIH PDUs on multiaccess networks. It is also used
as the period between Hellos on point to point circuits.
This object follows the resettingTimer behaviour."REFERENCE"ISIS.aoi iSISHelloTimer (45)"DEFVAL{10}
::={ rsIsisCircEntry 33}rsIsisCircL2HelloTimer OBJECT-TYPESYNTAXInteger32(0..65535)
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Maximum period, in seconds, between Level 1
IIH PDUs on multiaccess networks. This object
follows the resettingTimer behaviour."REFERENCE"ISIS.aoi iSISHelloTimer (45)"DEFVAL{10}
::={ rsIsisCircEntry 34}rsIsisCircL1HelloMultiplier OBJECT-TYPESYNTAXInteger32(3..1000)MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This value is multiplied by the corresponding HelloTimer
and the result in seconds (rounded up) is used as the
holding time in transmitted hellos, to be used by receivers
of hello packets from this IS"REFERENCE"ISIS.aoi iSISHelloTimer (45)"DEFVAL{3}
::={ rsIsisCircEntry 35}rsIsisCircL2HelloMultiplier OBJECT-TYPESYNTAXInteger32(3..1000)MAX-ACCESSread-writeSTATUScurrentDESCRIPTION
"This value is multiplied by the corresponding HelloTimer
and the result in seconds (rounded up) is used as the
holding time in transmitted hellos, to be used by receivers
of hello packets from this IS"REFERENCE"ISIS.aoi iSISHelloTimer (45)"DEFVAL{3}
::={ rsIsisCircEntry 36}rsIsisCircMinLSPTransInt OBJECT-TYPESYNTAXInteger32(1..65535)MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Minimum interval, in milliseconds, between transmission
of LSPs on a circuit. This object follows the
resettingTimer behaviour. This timer shall be capable of
a resolution not coarser than 10 milliseconds."REFERENCE"ISIS.aoi minimumBroadcastLSPTransmissionInterval (7)"DEFVAL{33}
::={ rsIsisCircEntry 37}rsIsisCircMinLSPReTransInt OBJECT-TYPESYNTAXInteger32(1..65535)MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Minimum interval, in seconds, between re-transmission of
an Level 1 or 2 LSP. This object follows the resettingTimer
behaviour."REFERENCE"ISIS.aoi minimumLSPTransmissionInterval (5)"DEFVAL{5}
::={ rsIsisCircEntry 38}rsIsisCircL1CSNPInterval OBJECT-TYPESYNTAXInteger32(0..65535)MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Interval of time, in seconds, between transmission
of Level 1 CSNPs on multiaccess networks if this
router is the designated router. On point-to-point
networks the default is to not transmit CSNPs."REFERENCE""DEFVAL{10}
::={ rsIsisCircEntry 39}rsIsisCircL2CSNPInterval OBJECT-TYPESYNTAXInteger32(1..65535)MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Interval of time, in seconds, between transmission
of Level 2 CSNPs on multiaccess networks if this
router is the designated router.On point-to-point
networks the default is to not transmit CSNPs."REFERENCE""DEFVAL{10}
::={ rsIsisCircEntry 40}rsIsisCircLSPThrottle OBJECT-TYPESYNTAXInteger32(0..65535)MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Minimal interval of time, in milliseconds, between
retransmissions of LSPs on a point to point interface."REFERENCE""DEFVAL{33}
::={ rsIsisCircEntry 41}rsIsisCircMeshGroupEnabled OBJECT-TYPESYNTAXINTEGER{inactive(1),blocked(2),set(3)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Is this port a member of a mesh group, or blocked?
Circuits in the same mesh group act as a virtual
multiaccess network. LSPs seen on one circuit in
a mesh group will not be flooded to another circuit
in the same mesh group."REFERENCE""DEFVAL{ inactive }
::={ rsIsisCircEntry 42}
rsIsisCircMeshGroup OBJECT-TYPESYNTAXInteger32(1..2000000000)MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"Circuits in the same mesh group act as a virtual
multiaccess network. LSPs seen on one circuit in
a mesh group will not be flooded to another circuit
in the same mesh group. If rsIsisCircMeshGroupEnabled
is false, this value is ignored."REFERENCE""DEFVAL{1}
::={ rsIsisCircEntry 43}rsIsisCircLevel OBJECT-TYPESYNTAXINTEGER{level1IS(0),level1l2IS(1),level2Only(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The type of this circuit. This object follows the
replaceOlyWhileDisabled behavior."REFERENCE"ISIS.aoi iSType(2)"::={ rsIsisCircEntry 44}-- The System Host Name Table-- The System Host Name Table contains a manually
-- configured set of host to system ID aliases
-- supported by each instance of the Integrated
-- ISIS protocol.
--rsIsisSysHostNameTable OBJECT-TYPESYNTAXSEQUENCEOF IsisSysHostNameEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table contains the manually configured set of
host name to system ID aliases supported by each instance
of the Integrated ISIS protocol."::={ rsIsisSystemGroup 5}rsIsisSysHostNameEntry OBJECT-TYPESYNTAX IsisSysHostNameEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Each entry contains one name to system ID alias supported
by an instance of the Integrated ISIS protocol."INDEX{ rsIsisSysHostNameSysInstance,
rsIsisSysHostNameSysId }::={ rsIsisSysHostNameTable 1}
IsisSysHostNameEntry ::=SEQUENCE{
rsIsisSysHostNameSysInstance
Integer32,
rsIsisSysHostNameSysId
SystemID,
rsIsisSysHostNameAreaAddr
OSINSAddress,
rsIsisSysHostNameName
OCTETSTRING,
rsIsisSysHostNameType
INTEGER,
rsIsisSysHostNameRowStatus
RowStatus}rsIsisSysHostNameSysInstance OBJECT-TYPESYNTAXInteger32MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The unique identifier of the Integrated IS-IS instance
to which this row corresponds. This object follows the
index behaviour."::={ rsIsisSysHostNameEntry 1}rsIsisSysHostNameSysId OBJECT-TYPESYNTAX SystemID
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The ID for the system which this name will be assigned."::={ rsIsisSysHostNameEntry 2}rsIsisSysHostNameAreaAddr OBJECT-TYPESYNTAX OSINSAddress
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"A configured area address for the system which this name
will be assigned. This object follows the index behaviour.
Note: an index for the entry {1, {49.0001} active} in
this table would be the ordered pair
(1, (0x03 0x49 0x00 0x01)), as the length of an Octet
string is part of the OID."::={ rsIsisSysHostNameEntry 3}rsIsisSysHostNameName OBJECT-TYPE
SYNTAXOCTETSTRING(SIZE(0..32))MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"A string to use when displaying system data with this system ID."::={ rsIsisSysHostNameEntry 4}rsIsisSysHostNameType OBJECT-TYPESYNTAXINTEGER{hostNameTypeStatic(1),hostNameTypeDynamic(2)}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The type of host name entry."::={ rsIsisSysHostNameEntry 5}rsIsisSysHostNameRowStatus OBJECT-TYPESYNTAXRowStatusMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The status of this host name entry. This object follows
the Row Status behaviour."::={ rsIsisSysHostNameEntry 6}-- The Area Authentication Table-- The Area Authentication Table contains the manually
-- configured set of authentication keys used to authenticate
-- Level 1 LSPs and SNPs in each instance of the Integrated ISIS
-- protocol.
--rsIsisSysAreaAuthenticationTable OBJECT-TYPESYNTAXSEQUENCEOF IsisSysAreaAuthenticationEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table contains the manually configured set of
area authentication keys supported by each instance
of the Integrated ISIS protocol."::={ rsIsisSystemGroup 6}rsIsisSysAreaAuthenticationEntry OBJECT-TYPESYNTAX IsisSysAreaAuthenticationEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Each entry contains one area authentication key supported
by an instance of the Integrated ISIS protocol."INDEX{ rsIsisSysAreaAuthenticationSysInstance,
rsIsisSysAreaAuthenticationKeyId }::={ rsIsisSysAreaAuthenticationTable 1}
IsisSysAreaAuthenticationEntry ::=SEQUENCE{
rsIsisSysAreaAuthenticationSysInstance
Integer32,
rsIsisSysAreaAuthenticationKeyId
Integer32,
rsIsisSysAreaAuthenticationPwd
OCTETSTRING,
rsIsisSysAreaAuthenticationKeyType
INTEGER,
rsIsisSysAreaAuthenticationStartAcceptTime
AuthTime,
rsIsisSysAreaAuthenticationStartGenerateTime
AuthTime,
rsIsisSysAreaAuthenticationStopAcceptTime
AuthTime,
rsIsisSysAreaAuthenticationStopGenerateTime
AuthTime,
rsIsisSysAreaAuthenticationRowStatus
RowStatus}rsIsisSysAreaAuthenticationSysInstance OBJECT-TYPESYNTAXInteger32MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The unique identifier of the Integrated IS-IS instance
to which this row corresponds. This object follows the
index behaviour."::={ rsIsisSysAreaAuthenticationEntry 1}rsIsisSysAreaAuthenticationKeyId OBJECT-TYPESYNTAXInteger32MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The unique identifier of the instance to which this
row corresponds. This object follows the index behaviour."::={ rsIsisSysAreaAuthenticationEntry 2}rsIsisSysAreaAuthenticationPwd OBJECT-TYPESYNTAXOCTETSTRING(SIZE(0..20))
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The value to be used as the Authentication Key in
Level 1 Link State Packets whenever the value of
rsIsisSysAreaAuthenticationKeyType has a value of
plaintext or hmacMd5.
A modification of rsIsisSysAreaAuthenticationKeyType does not
modify the rsIsisSysAreaAuthenticationPwd value.
Reading this object always results in an OCTET
STRING of length zero; authentication may not
be bypassed by reading the MIB object."DEFVAL{""}
::={ rsIsisSysAreaAuthenticationEntry 3}rsIsisSysAreaAuthenticationKeyType OBJECT-TYPESYNTAXINTEGER{none(0),hmacMd5(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"What authentication scheme, if any, is used to protect
Level 1 Link State packets and sequence number packets"DEFVAL{ hmacMd5 }
::={ rsIsisSysAreaAuthenticationEntry 4}rsIsisSysAreaAuthenticationStartAcceptTime OBJECT-TYPESYNTAX AuthTime
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The date and time when this authentication key will start
to be used to validate level 1 LSPs and SNPs received.
The Default value the start accept time will be the current
time when the key was created"::={ rsIsisSysAreaAuthenticationEntry 5}rsIsisSysAreaAuthenticationStartGenerateTime OBJECT-TYPESYNTAX AuthTime
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The date and time when this authentication key will start
to be used to authenticate level 1 LSPs and SNPs transmitted.
The Default value the start accept time will be the current
time when the key was created + 2 minutes"::={ rsIsisSysAreaAuthenticationEntry 6}rsIsisSysAreaAuthenticationStopAcceptTime OBJECT-TYPESYNTAX AuthTime
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The date and time when this authentication key will stop
being accepted as a valid level 1 LSP and SNP key received.
A value of zero indicates the key will never stop being used
to authenticate packets."DEFVAL{0}
::={ rsIsisSysAreaAuthenticationEntry 7}rsIsisSysAreaAuthenticationStopGenerateTime OBJECT-TYPESYNTAX AuthTime
MAX-ACCESSread-writeSTATUScurrent
DESCRIPTION"The date and time when this authentication key will stop
being used to authenticate level 1 LSPs and SNPs transmitted.
A value of zero indicates the key will never stop being used
to authenticate packets."DEFVAL{0}
::={ rsIsisSysAreaAuthenticationEntry 8}rsIsisSysAreaAuthenticationRowStatus OBJECT-TYPESYNTAXRowStatusMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The existence state of this authentication key. This
object follows the Row Status behaviour."::={ rsIsisSysAreaAuthenticationEntry 9}-- The Domain Authentication Table-- The Domain Authentication Table contains the manually
-- configured set of authentication keys used to authenticate
-- Level 2 LSPs and SNPs in each instance of the Integrated ISIS
-- protocol.
--rsIsisSysDomainAuthenticationTable OBJECT-TYPESYNTAXSEQUENCEOF IsisSysDomainAuthenticationEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table contains the manually configured set of
domain authentication keys supported by each instance
of the Integrated ISIS protocol."::={ rsIsisSystemGroup 7}rsIsisSysDomainAuthenticationEntry OBJECT-TYPE
SYNTAX IsisSysDomainAuthenticationEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Each entry contains one domain authentication key supported
by an instance of the Integrated ISIS protocol."INDEX{ rsIsisSysDomainAuthenticationSysInstance,
rsIsisSysDomainAuthenticationKeyId }::={ rsIsisSysDomainAuthenticationTable 1}
IsisSysDomainAuthenticationEntry ::=SEQUENCE{
rsIsisSysDomainAuthenticationSysInstance
Integer32,
rsIsisSysDomainAuthenticationKeyId
Integer32,
rsIsisSysDomainAuthenticationPwd
OCTETSTRING,
rsIsisSysDomainAuthenticationKeyType
INTEGER,
rsIsisSysDomainAuthenticationStartAcceptTime
AuthTime,
rsIsisSysDomainAuthenticationStartGenerateTime
AuthTime,
rsIsisSysDomainAuthenticationStopAcceptTime
AuthTime,
rsIsisSysDomainAuthenticationStopGenerateTime
AuthTime,
rsIsisSysDomainAuthenticationRowStatus
RowStatus}rsIsisSysDomainAuthenticationSysInstance OBJECT-TYPESYNTAXInteger32MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION
"The unique identifier of the Integrated IS-IS instance
to which this row corresponds. This object follows the
index behaviour."::={ rsIsisSysDomainAuthenticationEntry 1}rsIsisSysDomainAuthenticationKeyId OBJECT-TYPESYNTAXInteger32MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The unique identifier of the instance to which this
row corresponds. This object follows the index behaviour."::={ rsIsisSysDomainAuthenticationEntry 2}rsIsisSysDomainAuthenticationPwd OBJECT-TYPESYNTAXOCTETSTRING(SIZE(0..20))MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The value to be used as the Authentication Key in
Level 2 Link State Packets whenever the value of
rsIsisSysDomainAuthenticationKeyType has a value of
plaintext or hmacMd5.
A modification of rsIsisSysDomainAuthenticationKeyType does not
modify the rsIsisSysDomainAuthenticationPwd value.
Reading this object always results in an OCTET
STRING of length zero; authentication may not
be bypassed by reading the MIB object."DEFVAL{""}
::={ rsIsisSysDomainAuthenticationEntry 3}
rsIsisSysDomainAuthenticationKeyType OBJECT-TYPESYNTAXINTEGER{none(0),hmacMd5(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"What authentication scheme, if any, is used to protect
Level 2 Link State packets and Sequence Number packets"DEFVAL{ hmacMd5 }
::={ rsIsisSysDomainAuthenticationEntry 4}rsIsisSysDomainAuthenticationStartAcceptTime OBJECT-TYPESYNTAX AuthTime
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The date and time when this authentication key will start
to be used to validate level 2 LSPs and SNPs received.
The Default value the start accept time will be the current
time when the key was created"::={ rsIsisSysDomainAuthenticationEntry 5}rsIsisSysDomainAuthenticationStartGenerateTime OBJECT-TYPESYNTAX AuthTime
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The date and time when this authentication key will start
to be used to authenticate level 2 LSPs and SNPs transmitted.
The Default value the start accept time will be the current
time when the key was created + 2 minutes"::={ rsIsisSysDomainAuthenticationEntry 6}rsIsisSysDomainAuthenticationStopAcceptTime OBJECT-TYPESYNTAX AuthTime
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The date and time when this authentication key will stop
being accepted as a valid level 2 LSP and SNP key received.
A value of zero indicates the key will never stop being used
to authenticate packets."DEFVAL{0}
::={ rsIsisSysDomainAuthenticationEntry 7}rsIsisSysDomainAuthenticationStopGenerateTime OBJECT-TYPESYNTAX AuthTime
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The date and time when this authentication key will stop
being used to authenticate level 2 LSPs and SNPs transmitted.
A value of zero indicates the key will never stop being used
to authenticate packets."DEFVAL{0}
::={ rsIsisSysDomainAuthenticationEntry 8}rsIsisSysDomainAuthenticationRowStatus OBJECT-TYPESYNTAXRowStatusMAX-ACCESSread-writeSTATUScurrentDESCRIPTION
"The existence state of this authentication key. This
object follows the Row Status behaviour."::={ rsIsisSysDomainAuthenticationEntry 9}-- The Level 1 Circuit Authentication Table-- The Level 1 Circuit Authentication Table contains the manually
-- configured set of authentication keys used to authenticate
-- Level 1 hello packets in each instance of the Integrated ISIS
-- protocol.
--rsIsisSysL1CircAuthenticationTable OBJECT-TYPESYNTAXSEQUENCEOF IsisSysL1CircAuthenticationEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table contains the manually configured set of
Level 1 Circuit authentication keys supported by each
instance of the Integrated ISIS protocol."::={ rsIsisCircuitGroup 2}rsIsisSysL1CircAuthenticationEntry OBJECT-TYPESYNTAX IsisSysL1CircAuthenticationEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Each entry contains one Level 1 circuit authentication key
supported by an instance of the Integrated ISIS protocol."INDEX{ rsIsisSysL1CircAuthenticationSysInstance,
rsIsisSysL1CircAuthenticationIfIndex,
rsIsisSysL1CircAuthenticationKeyId }::={ rsIsisSysL1CircAuthenticationTable 1}
IsisSysL1CircAuthenticationEntry ::=SEQUENCE{
rsIsisSysL1CircAuthenticationSysInstance
Integer32,
rsIsisSysL1CircAuthenticationIfIndex
Integer32,
rsIsisSysL1CircAuthenticationKeyId
Integer32,
rsIsisSysL1CircAuthenticationPwd
OCTETSTRING,
rsIsisSysL1CircAuthenticationKeyType
INTEGER,
rsIsisSysL1CircAuthenticationStartAcceptTime
AuthTime,
rsIsisSysL1CircAuthenticationStartGenerateTime
AuthTime,
rsIsisSysL1CircAuthenticationStopAcceptTime
AuthTime,
rsIsisSysL1CircAuthenticationStopGenerateTime
AuthTime,
rsIsisSysL1CircAuthenticationRowStatus
RowStatus}rsIsisSysL1CircAuthenticationSysInstance OBJECT-TYPESYNTAXInteger32MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The unique identifier of the Integrated IS-IS instance
to which this row corresponds. This object follows the
index behaviour."::={ rsIsisSysL1CircAuthenticationEntry 1}rsIsisSysL1CircAuthenticationIfIndex OBJECT-TYPESYNTAXInteger32MAX-ACCESSnot-accessibleSTATUScurrent
DESCRIPTION"The value of ifIndex for the interface to which this
circuit corresponds."::={ rsIsisSysL1CircAuthenticationEntry 2}rsIsisSysL1CircAuthenticationKeyId OBJECT-TYPESYNTAXInteger32MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The unique identifier of the instance to which this
row corresponds. This object follows the index behaviour."::={ rsIsisSysL1CircAuthenticationEntry 3}rsIsisSysL1CircAuthenticationPwd OBJECT-TYPESYNTAXOCTETSTRING(SIZE(0..20))MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The value to be used as the Authentication Key in
Level 1 Hello Packets whenever the value of
rsIsisSysL1CircAuthenticationKeyType has a value of
hmacMd5.
A modification of rsIsisSysL1CircAuthenticationKeyType does not
modify the rsIsisSysL1CircAuthenticationPwd value.
Reading this object always results in an OCTET
STRING of length zero; authentication may not
be bypassed by reading the MIB object."DEFVAL{""}
::={ rsIsisSysL1CircAuthenticationEntry 4}
rsIsisSysL1CircAuthenticationKeyType OBJECT-TYPESYNTAXINTEGER{none(0),hmacMd5(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"What authentication scheme, if any, is used to protect
Level 1 hello packets"DEFVAL{ hmacMd5 }
::={ rsIsisSysL1CircAuthenticationEntry 5}rsIsisSysL1CircAuthenticationStartAcceptTime OBJECT-TYPESYNTAX AuthTime
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The date and time when this authentication key will start
to be used to validate level 1 IIH packets received.
The Default value the start accept time will be the current
time when the key was created"::={ rsIsisSysL1CircAuthenticationEntry 6}rsIsisSysL1CircAuthenticationStartGenerateTime OBJECT-TYPESYNTAX AuthTime
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The date and time when this authentication key will start
to be used to authenticate level 1 IIH packets transmitted.
The Default value the start accept time will be the current
time when the key was created + 2 minutes"::={ rsIsisSysL1CircAuthenticationEntry 7}rsIsisSysL1CircAuthenticationStopAcceptTime OBJECT-TYPESYNTAX AuthTime
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The date and time when this authentication key will stop
being accepted as a valid level 1 IIH packets key received.
A value of zero indicates the key will never stop being used
to authenticate packets."DEFVAL{0}
::={ rsIsisSysL1CircAuthenticationEntry 8}rsIsisSysL1CircAuthenticationStopGenerateTime OBJECT-TYPESYNTAX AuthTime
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The date and time when this authentication key will stop
being used to authenticate level 1 IIH packets transmitted.
A value of zero indicates the key will never stop being used
to authenticate packets."DEFVAL{0}
::={ rsIsisSysL1CircAuthenticationEntry 9}rsIsisSysL1CircAuthenticationRowStatus OBJECT-TYPESYNTAXRowStatusMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The existence state of this authentication key. This
object follows the Row Status behaviour."::={ rsIsisSysL1CircAuthenticationEntry 10}-- The Level 2 Circuit Authentication Table-- The Level 2 Circuit Authentication Table contains the manually
-- configured set of authentication keys used to authenticate
-- Level 2 hello packets in each instance of the Integrated ISIS
-- protocol.
--rsIsisSysL2CircAuthenticationTable OBJECT-TYPESYNTAXSEQUENCEOF IsisSysL2CircAuthenticationEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table contains the manually configured set of
Level 2 Circuit authentication keys supported by each
instance of the Integrated ISIS protocol."::={ rsIsisCircuitGroup 3}rsIsisSysL2CircAuthenticationEntry OBJECT-TYPESYNTAX IsisSysL2CircAuthenticationEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Each entry contains one Level 2 circuit authentication key
supported by an instance of the Integrated ISIS protocol."INDEX{ rsIsisSysL2CircAuthenticationSysInstance,
rsIsisSysL2CircAuthenticationIfIndex,
rsIsisSysL2CircAuthenticationKeyId }::={ rsIsisSysL2CircAuthenticationTable 1}
IsisSysL2CircAuthenticationEntry ::=
SEQUENCE{
rsIsisSysL2CircAuthenticationSysInstance
Integer32,
rsIsisSysL2CircAuthenticationIfIndex
Integer32,
rsIsisSysL2CircAuthenticationKeyId
Integer32,
rsIsisSysL2CircAuthenticationPwd
OCTETSTRING,
rsIsisSysL2CircAuthenticationKeyType
INTEGER,
rsIsisSysL2CircAuthenticationStartAcceptTime
AuthTime,
rsIsisSysL2CircAuthenticationStartGenerateTime
AuthTime,
rsIsisSysL2CircAuthenticationStopAcceptTime
AuthTime,
rsIsisSysL2CircAuthenticationStopGenerateTime
AuthTime,
rsIsisSysL2CircAuthenticationRowStatus
RowStatus}rsIsisSysL2CircAuthenticationSysInstance OBJECT-TYPESYNTAXInteger32MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The unique identifier of the Integrated IS-IS instance
to which this row corresponds. This object follows the
index behaviour."::={ rsIsisSysL2CircAuthenticationEntry 1}rsIsisSysL2CircAuthenticationIfIndex OBJECT-TYPESYNTAXInteger32MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION
"The value of ifIndex for the interface to which this
circuit corresponds."::={ rsIsisSysL2CircAuthenticationEntry 2}rsIsisSysL2CircAuthenticationKeyId OBJECT-TYPESYNTAXInteger32MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The unique identifier of the instance to which this
row corresponds. This object follows the index behaviour."::={ rsIsisSysL2CircAuthenticationEntry 3}rsIsisSysL2CircAuthenticationPwd OBJECT-TYPESYNTAXOCTETSTRING(SIZE(0..20))MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The value to be used as the Authentication Key in
Level 2 Hello Packets whenever the value of
rsIsisSysL2CircAuthenticationKeyType has a value of
hmacMd5.
A modification of rsIsisSysL2CircAuthenticationKeyType does not
modify the rsIsisSysL2CircAuthenticationPwd value.
Reading this object always results in an OCTET
STRING of length zero; authentication may not
be bypassed by reading the MIB object."DEFVAL{""}
::={ rsIsisSysL2CircAuthenticationEntry 4}rsIsisSysL2CircAuthenticationKeyType OBJECT-TYPE
SYNTAXINTEGER{none(0),hmacMd5(2)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"What authentication scheme, if any, is used to protect
Level 2 hello packets"DEFVAL{ hmacMd5 }
::={ rsIsisSysL2CircAuthenticationEntry 5}rsIsisSysL2CircAuthenticationStartAcceptTime OBJECT-TYPESYNTAX AuthTime
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The date and time when this authentication key will start
to be used to validate level 2 IIH packets received.
The Default value the start accept time will be the current
time when the key was created"::={ rsIsisSysL2CircAuthenticationEntry 6}rsIsisSysL2CircAuthenticationStartGenerateTime OBJECT-TYPESYNTAX AuthTime
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The date and time when this authentication key will start
to be used to authenticate level 2 IIH packets transmitted.
The Default value the start accept time will be the current
time when the key was created + 2 minutes"
::={ rsIsisSysL2CircAuthenticationEntry 7}rsIsisSysL2CircAuthenticationStopAcceptTime OBJECT-TYPESYNTAX AuthTime
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The date and time when this authentication key will stop
being accepted as a valid level 2 IIH packets key received.
A value of zero indicates the key will never stop being used
to authenticate packets."DEFVAL{0}
::={ rsIsisSysL2CircAuthenticationEntry 8}rsIsisSysL2CircAuthenticationStopGenerateTime OBJECT-TYPESYNTAX AuthTime
MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The date and time when this authentication key will stop
being used to authenticate level 2 IIH packets transmitted.
A value of zero indicates the key will never stop being used
to authenticate packets."DEFVAL{0}
::={ rsIsisSysL2CircAuthenticationEntry 9}rsIsisSysL2CircAuthenticationRowStatus OBJECT-TYPESYNTAXRowStatusMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The existence state of this authentication key. This
object follows the Row Status behaviour."
DEFVAL{ active }
::={ rsIsisSysL2CircAuthenticationEntry 10}-- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-- Conformance information
-- ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++rsIsisCompliances OBJECTIDENTIFIER::={ rsIsisConformance 1}rsIsisMIBGroups OBJECTIDENTIFIER::={ rsIsisConformance 2}-- Compliance StatementsrsIsisCompliance MODULE-COMPLIANCESTATUScurrentDESCRIPTION"The compliance statement for systems supporting ISIS functionality"MODULE-- rsIsisMIB
--PSIM MANDATORY-GROUPS { rsIsisiSystemMgmtGroup, rsIsisCircuitMgmtGroup }MANDATORY-GROUPS{ rsIsisSystemMgmtGroup, rsIsisCircuitMgmtGroup }::={ rsIsisCompliances 1}-- Units of ConformancersIsisSystemMgmtGroup OBJECT-GROUPOBJECTS{
rsIsisSysVersion,
rsIsisSysType,
rsIsisSysID,
rsIsisSysMaxPathSplits,
rsIsisSysMaxLSPGenInt,
rsIsisSysOrigL1LSPBuffSize,
rsIsisSysMaxAreaAddresses,
rsIsisSysMinL1LSPGenInt,
rsIsisSysMinL2LSPGenInt,
rsIsisSysPollESHelloRate,
rsIsisSysWaitTime,
rsIsisSysOperState,
rsIsisSysL1State,
rsIsisSysCorrLSPs,
rsIsisSysLSPL1DbaseOloads,
rsIsisSysManAddrDropFromAreas,
rsIsisSysAttmptToExMaxSeqNums,
rsIsisSysSeqNumSkips,
rsIsisSysOwnLSPPurges,
rsIsisSysIDFieldLenMismatches,
rsIsisSysMaxAreaAddrMismatches,
rsIsisSysOrigL2LSPBuffSize,
rsIsisSysL2State,
rsIsisSysLSPL2DbaseOloads,
rsIsisSysAuthFails,
rsIsisSysLSPIgnoreErrors,
rsIsisSysMaxAreaCheck,
rsIsisSysSetOverloadBit,
rsIsisSysSetOverloadBitStartupDuration,
rsIsisSysMaxLspLifetime ,
rsIsisSysL1SpfInterval,
rsIsisSysL2SpfInterval,
rsIsisSysIshHoldTime,
rsIsisSysIshConfigTimer,
rsIsisSysDistributeDomainWide,
rsIsisSysDistance,
rsIsisSysL1MetricStyle,
rsIsisSysL2MetricStyle,
rsIsisSysIsoRouteTag,
rsIsisManAreaAddrRowStatus,
rsIsisSysProtSuppRowStatus,
rsIsisSummAddrRowStatus,
rsIsisSummAddrOperState,
rsIsisSummAddrDefaultMetric,
rsIsisSummAddrDelayMetric,
rsIsisSummAddrExpenseMetric,
rsIsisSummAddrErrorMetric,
rsIsisSummLevel,
rsIsisSysHostNameAreaAddr,
rsIsisSysHostNameName,
rsIsisSysHostNameType,
rsIsisSysHostNameRowStatus,
rsIsisSysAreaAuthenticationPwd,
rsIsisSysAreaAuthenticationKeyType,
rsIsisSysAreaAuthenticationStartAcceptTime,
rsIsisSysAreaAuthenticationStartGenerateTime,
rsIsisSysAreaAuthenticationStopAcceptTime,
rsIsisSysAreaAuthenticationStopGenerateTime,
rsIsisSysAreaAuthenticationRowStatus,
rsIsisSysDomainAuthenticationPwd,
rsIsisSysDomainAuthenticationKeyType,
rsIsisSysDomainAuthenticationStartAcceptTime,
rsIsisSysDomainAuthenticationStartGenerateTime,
rsIsisSysDomainAuthenticationStopAcceptTime,
rsIsisSysDomainAuthenticationStopGenerateTime,
rsIsisSysDomainAuthenticationRowStatus
}STATUScurrentDESCRIPTION"The system level objects for ISIS management functionality"::={ rsIsisMIBGroups 1}rsIsisCircuitMgmtGroup OBJECT-GROUPOBJECTS{
rsIsisCircLocalID,
rsIsisCircOperState,
rsIsisCircRowStatus,
rsIsisCircType,
rsIsisCircL1DefaultMetric,
rsIsisCircL1DelayMetric,
rsIsisCircL1ExpenseMetric,
rsIsisCircL1ErrorMetric,
rsIsisCircExtDomain,
rsIsisCircAdjChanges,
rsIsisCircInitFails,
rsIsisCircRejAdjs,
rsIsisCircOutCtrlPDUs,
rsIsisCircInCtrlPDUs,
rsIsisCircIDFieldLenMismatches,
rsIsisCircL2DefaultMetric,
rsIsisCircL2DelayMetric,
rsIsisCircL2ExpenseMetric,
rsIsisCircL2ErrorMetric,
rsIsisCircManL2Only,
rsIsisCircL1ISPriority,
rsIsisCircL1CircID,
rsIsisCircL1DesIS,
rsIsisCircLANL1DesISChanges,
rsIsisCircL2ISPriority,
rsIsisCircL2CircID,
rsIsisCircL2DesIS,
rsIsisCircLANL2DesISChanges,
rsIsisCircMCAddr,
rsIsisCircPtToPtCircID,
rsIsisCircL1HelloTimer,
rsIsisCircL2HelloTimer,
rsIsisCircL1HelloMultiplier,
rsIsisCircL2HelloMultiplier,
rsIsisCircMinLSPTransInt,
rsIsisCircMinLSPReTransInt,
rsIsisCircL1CSNPInterval,
rsIsisCircL2CSNPInterval,
rsIsisCircLSPThrottle,
rsIsisCircMeshGroupEnabled,
rsIsisCircMeshGroup,
rsIsisCircLevel,
rsIsisSysL1CircAuthenticationPwd,
rsIsisSysL1CircAuthenticationKeyType,
rsIsisSysL1CircAuthenticationStartAcceptTime,
rsIsisSysL1CircAuthenticationStartGenerateTime,
rsIsisSysL1CircAuthenticationStopAcceptTime,
rsIsisSysL1CircAuthenticationStopGenerateTime,
rsIsisSysL1CircAuthenticationRowStatus,
rsIsisSysL2CircAuthenticationPwd,
rsIsisSysL2CircAuthenticationKeyType,
rsIsisSysL2CircAuthenticationStartAcceptTime,
rsIsisSysL2CircAuthenticationStartGenerateTime,
rsIsisSysL2CircAuthenticationStopAcceptTime,
rsIsisSysL2CircAuthenticationStopGenerateTime,
rsIsisSysL2CircAuthenticationRowStatus
}STATUScurrentDESCRIPTION"The circuit management objects"::={ rsIsisMIBGroups 2}END